Floodlight LED

The Floodlight LED meets a variety of lighting needs across three different applications: architectural, site lighting and signage. A choice of optics makes it an extremely flexible and versatile LED solution, delivers excellent quality of light just where it is required.

The LED Floodlight delivers uniform lighting with no hot spots and with improved lighting of upper areas of buildings.

  • Choice of 5 optics: narrow, medium, wide flood, poster, bulletin
  • IP65 for the optics and electrical compartment
  • Choice of 3 mountings: trunnion, slipfitter, and wall mounting
  • Color temperatures of 3000, 4000 and 6000K

Structures and materials
Housing: Die cast aluminum housing electrostatically sprayed with a polyester powder paint finish, following anti-corrosion priming, and oven cured at 180ºC. Meets 2G vibration standards.
Standard color: RAL 7001, silver.

Electrical and gear compartment
Dimmable 1-10Vdriver. Isolated from the environment.
Protection degree: IP65.
Nominal line voltage: 200-277V 50/60Hz. PF>0.9.
Class: I.
Cable: silicon rubber cable for power input. Fasten with screw in the cable gland.
Ambient temperature: –25ºC to +40ºC.

Optical assembly: hermetically sealed providing IP65.
Great light uniformity: Thanks to the advance LED optical systems the fixture maximize the utilization of light onto the target area, improving the uniformity of light.
Choice of optics: The Floodlight LED offers a choice of five different optical versions, all of them with a maximum system consumption of 90W.
  • Narrow Spot NEMA (1x1)
  • Medium Flood NEMA (5x5)
  • Wide Flood NEMA (6x5)
  • Poster NEMA (6x5)
  • Bulletin NEMA (5x4)

The two last are specifically designed for sign lighting applications. Illuminating face in the vertical plane of the signs.
Color temperature: LED floodlight provide a range of color temperatures from 3000, 4000 and 6000 Kelvin helping to enhance a building’s exterior.

70% lumen maintenance at 50,000 hours.
Three kits available for the installation.
  • Trunnion mounting using a heavy-gauge steel bracket with aiming degree indicator.
  • Slipfitter mounting adapter to be installed in a pole with 48 to 73mm diameter
  • Wall mounting bracket that is fasten to the floodlight LED through the slipfitter mounting adapter.