R250 LED

The LED Road R250 luminaire features an advanced LED optical system that provides improved horizontal and vertical uniformity, reduced glare and improved lighting control compared with traditional metal halide systems. A modular design offering hundreds of photometric options makes the R250 suitable for use on everything from local streets to major roadways.

  • Die cast aluminum housing
  • Available from 39W to 229W
  • IP 65 for the optics and electrical compartment
  • 70 CRI at 3000K, 4000K and 5700K CCT
  • Ambient temperature from -40 to +50ºC

Structures and materials
Die cast aluminum housing. Stylized architectural design incorporates a heat sink directly into the unit ensuring maximum heat transfer, long LED life and reduced Effective Projected Area (EPA). Corrosion resistant polyester paint finish and oven cured.
Meet 2G vibration test.
Standard color: silver grey. Other RAL colors available on request.

Electrical and gear compartment
Driver: the dimmable analog (1-10V) driver is mounted in a separate compartment, isolated from the optical assembly with a protection degree of IP65.
Nominal line voltage: 200-240V 50/60Hz.
System power factor is >90% and THD < 15%.
Output current is 350 mA.

Optical assembly hermetically sealed providing IP65. Utilized high brightness LED, 70 CRI at 6000K, 4300K and 3000K.LM-79 test and reports are performed in accordance withIESNA standards.

System rating: 50,000 hours at L80.
Ambient temperature: from -40 to 50ºC.
Storage temperature: up to 85°C.

Side entry mounting: for 60 mm diameter poles and brackets, the coupling must be ordered separately.
Post top coupling: for 60 diameter poles, the couplings must be ordered separately.